background background Dotted Background

Pipe Fitting Weight Chart

Stainless Steel Pipe Fittings
Weight Chart

Pipe Fittings Weight, Pipe Fittings Weight Chart In Kg, Pipe Fitting Weight Calculator, Stainless Steel Pipe Fitting Weights, 90 Degree Elbow Weight Calculator, Buttweld Fittings Weight Chart, Reducing Tee Weight Calculator, Seamless Pipe Weight Formula.

Check out our easy-to-use Buttweld Pipe Fittings Weight Chart in kg. It's a handy tool for your projects, helping you know the weight of different fittings. At Max Pipes and Fittings Inc, we keep things simple, making your installation planning hassle-free and accurate.

The weight of a pipe fitting depends on various factors such as its size, material, and type. Different materials, such as steel, stainless steel, copper, or PVC, have different weights per unit of volume.

To determine the weight of a specific pipe fitting, you would typically need to refer to manufacturer specifications or consult industry standards such as the American Society of Mechanical Engineers (ASME) or the American National Standards Institute (ANSI) standards, which provide weight charts for various types of fittings.

Here are some general guidelines for estimating the weight of common pipe fittings made of steel:
• For elbows (90 degrees): The weight can be estimated by multiplying the weight per unit length of the pipe by a factor, which is typically between 0.9 and 1.2, depending on the radius of the elbow.

Elbow Weight Chart In Kg, Tee Weight Chart In Kg, Reducing Tee Weight Chart, Equal Tee Weight Chart, Tee Weight Chart, Cross Weight, Reducer Weight Chart, Concentric Reducer Weight, End Cap Weight.

• For tees: The weight can be estimated by adding the weight per unit length of the pipe to which the tee is being connected, multiplied by a factor (usually between 1.2 and 1.5) to account for the added weight of the branch of the tee.
• For reducers: The weight can be estimated by subtracting the weight per unit length of the larger pipe from the weight per unit length of the smaller pipe, multiplied by the length of the reducer.
• For flanges: The weight can vary depending on the size and pressure rating of the flange. Standard weight flanges can have weights ranging from a few pounds to several hundred pounds.

It's important to note that these are just general guidelines, and the actual weight of a specific pipe fitting may vary based on the manufacturer, specifications, and other factors. It's always best to consult manufacturer catalogs or specific weight charts provided by the manufacturer for accurate information.

Buttweld Pipe Fittings Weight Chart

Type-> SCHEDULE STD Schedule XS SCHEDULE 160 SCHEDULE XXS
NPS LBS KG LBS KG LBS KG LBS KG
1/2 0.18 0.08 0.25 0.11 - - - -
3/4 0.19 0.09 0.25 0.11 - - - -
1 0.4 0.18 0.5 0.23 0.6 0.27 0.75 0.34
1¼ 0.6 0.27 0.9 0.41 1 0.45 1.38 0.63
1½ 0.9 0.41 1.15 0.52 1.8 0.82 1.5 0.68
2 1.6 0.73 2.2 1 3.25 1.47 3.5 1.59
2½ 3.25 1.47 4 1.81 5.13 2.33 7 3.18
3 5 2.27 6.5 2.95 8.5 3.86 11 4.99
3½ 6.75 3.06 8.35 3.79 - - 16 7.26
4 9 4.08 13.5 6.12 18 8.16 20 9.07
5 15 6.8 22 9.98 32 14.51 36 16.33
6 24.5 11.11 35 15.88 57 25.85 65 29.48
8 50 22.68 71 32.21 120 54.43 118 53.52
10 88 39.92 107 48.53 260 117.93 - -
12 125 56.7 160 72.57 450 204.12 - -
14 160 72.57 205 92.99 572 259.45 - -
16 206 93.44 276 125.19 - - - -
18 260 117.93 340 154.22 - - - -
20 320 145.15 420 190.51 - - - -
22 394 178.72 520 235.87 - - - -
24 460 208.65 600 272.16 - - - -
26 550 249.48 729 330.67 - - - -
30 734 332.94 975 442.25 - - - -
36 1062 481.72 1412 640.47 - - - -

Welded Butt Welding Fittings – ASTM A403M & ASME B16.9

Product range and theoretical weights (kg)
DN Schedule 10S Schedule 40S
900
Elbow
450
Elbow
Equal tee Stub end type B End cap 900
Elbow
450
Elbow
Equal tee Stub end type B End cap
15 0.06 0.03 0.09 0.07 0.03 0.08 0.04 0.10 0.08 0.04
20 0.07 0.03 0.13 0.09 0.05 0.08 0.04 0.17 0.11 0.07
25 0.14 0.08 0.28 0.16 0.08 0.15 0.11 0.29 0.17 0.10
32 0.23 0.11 0.49 0.22 0.10 0.26 0.17 0.59 0.25 0.18
40 0.30 0.17 0.68 0.25 0.11 0.40 0.23 0.86 0.31 0.20
50 0.50 0.25 0.85 0.43 0.13 0.70 0.40 1.28 0.61 0.23
65 0.85 0.48 1.41 0.57 0.19 1.40 0.77 2.19 0.80 0.27
80 1.25 0.63 1.77 0.72 0.25 2.20 1.08 3.31 1.13 0.42
100 2.10 1.08 3.46 1.09 0.68 4.47 1.47 5.27 1.87 1.14
125 3.65 1.82 5.44 1.47 1.11 6.80 2.84 9.63 2.79 2.13
150 5.45 2.72 8.03 2.15 1.42 10.89 5.44 10.99 3.57 3.23
200 10.20 5.33 15.65 3.22 2.38 21.54 10.77 20.91 6.07 5.19
250 18.15 9.75 26.76 5.13 4.45 38.56 19.27 35.38 10.07 9.00
300 25.80 13.62 39.46 8.16 7.50 59.42 29.71 62.14 14.29 15.00
350 36.29 18.37 48.53 10.88 8.17 79.38 35.15 79.31 17.14 16.00
400 47.63 23.81 58.97 12.70 10.67 99.79 45.81 99.79 20.41 21.00
450 59.87 29.94 79.65 17.23 13.00 129.73 59.40 129.73 27.21 26.00
500 99.80 49.90 103.42 21.77 17.00 162.38 74.84 162.39 29.94 34.00
600 140.61 70.31 155.58 27.21 26.00 225.89 105.23 225.90 38.55 52.00

Welded Butt Welding Fittings – ASTM A403M & ASME B16.9

Product range and theoretical weights (kg)
DN Schedule 10S Schedule 40S
Con reducer Ecc reducer Reducing tee Con reducer Ecc reducer Reducing tee
20x15 0.10 0.10 0.11 0.14 0.14 0.15
25x15 0.12 0.12 0.25 0.15 0.15 0.26
25x20 0.13 0.13 0.25 0.16 0.16 0.27
32x20 0.18 0.18 0.44 0.22 0.22 0.52
32x25 0.18 0.18 0.45 0.22 0.22 0.53
40x20 0.18 0.18 0.58 0.24 0.24 0.74
40x25 0.19 0.19 0.60 0.26 0.26 0.76
40x32 0.21 0.24 0.61 0.28 0.28 0.77
50x25 0.28 0.28 0.73 0.40 0.40 1.10
50x32 0.30 0.30 0.74 0.44 0.44 1.13
50x40 0.31 0.31 0.76 0.45 0.45 1.15
65x40 0.44 0.44 1.24 0.76 0.76 1.94
65x50 0.47 0.47 1.25 0.80 0.80 1.98
80x40 0.51 0.51 1.52 0.94 0.94 2.85
80x50 0.55 0.55 1.56 1.00 1.00 2.91
80x65 0.59 0.59 1.59 1.08 1.08 2.98
100x40 0.68 0.68 2.90 1.36 1.36 4.53
100x50 0.78 0.78 2.94 1.57 1.57 4.48
100x65 0.83 0.83 2.97 1.66 1.66 4.54
100x80 0.87 0.87 3.04 1.74 1.74 4.64
125x100 1.49 1.49 5.49 2.98 2.98 8.47
150x80 1.82 1.82 6.86 3.98 3.98 11.94
150x100 1.96 1.96 7.10 4.07 4.07 9.68
150x125 2.00 2.00 7.27 4.07 4.07 9.99
200x100 3.01 3.01 13.46 6.55 6.55 17.98
200x150 3.19 3.19 14.08 6.94 6.94 18.82
250x100 4.73 4.73 22.75 10.52 10.52 30.07
250x150 5.00 5.00 23.55 11.12 11.12 31.13
250x200 5.20 5.20 24.08 11.56 11.56 31.84
300x200 7.67 7.67 34.73 15.98 15.98 54.43
300x250 7.98 7.98 35.52 16.63 16.63 55.79
350x300 15.29 15.29 43.96 30.58 30.58 71.21
400x200 16.70 16.70 49.90 33.40 33.40 84.82
400x250 17.22 17.22 50.80 35.43 35.43 85.73
400x300 18.35 18.35 51.71 36.70 36.70 87.54

Seamless Butt Welding Fittings – ASTM A403M & ASME B16.9

Product range and theoretical weights (kg)
DN Schedule 10S Schedule 40S Schedule 80S
900 Elbow 450 Elbow Equal tee 900 Elbow 450 Elbow Equal tee 900 Elbow 450 Elbow Equal tee
8 0.02 0.01 0.03 0.03 0.02 0.06 0.04 0.03 0.07
10 0.03 0.02 0.05 0.03 0.02 0.03 0.06 0.04 0.09
15 0.06 0.03 0.09 0.08 0.04 0.10 0.10 0.05 0.14
20 0.07 0.03 0.13 0.08 0.04 0.17 0.11 0.05 0.20
25 0.14 0.08 0.28 0.15 0.11 0.29 0.22 0.14 0.38
32 0.23 0.11 0.49 0.26 0.17 0.59 0.40 0.23 0.68
40 0.30 0.17 0.68 0.40 0.23 0.86 0.51 0.29 1.02
50 0.50 0.25 0.85 0.70 0.4 1.28 0.91 0.59 1.59
65 0.85 0.48 1.41 1.40 0.77 2.19 1.81 0.99 3.13
80 1.25 0.63 1.77 2.20 1.08 3.31 2.97 1.50 4.45
90 1.70 0.75 2.67 2.83 1.42 4.08 4.00 2.00 5.44
100 2.10 1.08 3.46 4.47 2.09 5.27 6.18 2.81 7.71
150 5.45 2.72 8.07 10.89 5.44 10.99 16.32 8.16 13.61
200 10.20 5.33 15.65 21.54 10.77 20.91 33.11 16.56 28.12
250 18.15 9.75 26.46 38.56 19.27 35.38 51.71 25.86 49.90
300 25.80 13.62 39.46 59.42 29.71 62.14 79.38 39.69 83.91

Seamless Butt Welding Fittings – ASTM A403 & ASME B16.9

Product range and theoretical weights (kg)
DN Schedule 10S Schedule 40S Schedule 80S
Con reducer Ecc reducer Reducing tee Con reducer Ecc reducer Reducing tee Con reducer Ecc reducer Reducing tee
40x.25 0.19 0.19 0.60 0.26 0.26 0.76 0.34 0.34 0.90
50x25 0.28 0.28 0.73 0.40 0.40 1.10 0.54 0.54 1.37
50x40 0.31 0.31 0.76 0.45 0.45 1.15 0.59 0.59 1.43
80x.50 0.55 0.55 1.56 1.00 1.00 2.91 1.79 1.79 3.91
100x50 0.78 0.78 2.94 1.50 1.50 4.48 1.95 1.95 6.55
100x80 0.87 0.87 3.04 1.74 1.74 4.64 2.33 2.33 6.79
150x80 1.82 1.82 6.86 3.95 3.95 9.68 5.51 5.51 11.57
150x100 1.96 1.96 7.10 4.07 4.07 11.94 5.96 5.96 11.97
200x100 3.01 3.01 13.46 6.55 6.55 17.98 9.23 9.23 24.18
200x150 3.19 3.19 14.08 6.74 6.74 18.82 10.12 10.12 25.31